Glossary

Speed Climbing Timing System

How official electronic timing connects the start signal, start pad, finish pad and result system.

Updated October 26, 2026

Definition

The timing system is the certified electronics that start the clock from the start interface and stop it at the finish pad.

Why certification matters

Official results and records require an approved automatic timing system. A gym stopwatch or unofficial sensor is useful for training only.

What the rules require

In speed, the starting signal is a starting light on the left side of the route plus a unique audible tone from the timing system. The race begins after the starter announces “Ready” and starts the timing system. An attempt succeeds when the climber stops the timer by striking the finishing pad with a hand.

Times are recorded to 1/1000 s and officially rounded down to 1/100 s. Where a World Climbing-approved timing system is in use, there is no appeal against the validity of a reaction time, or against a case where a competitor does not stop the timer.

Example

A run recorded at 5.987 s is published as an official time of 5.98 s, because official times round down, not to the nearest hundredth.

See also: finish pad, split time, reaction time.

Sources: World Climbing Competition Rules, version 3, January 2026 §8.4 and the “Starting Signal” definition; World Climbing Event Regulations, version 3, January 2026 Annex B §4.10–4.11, §7.1–7.2 and §10.1. Last checked October 26, 2026.

Related guides

See timing systems and finish pad timing.